Teaching

EE 290 - Topics in Solid State Devices and Circuits
(3-0-6) Winter
Prerequisite: EE 190 ab. Advanced seminar in solid state devices and circuits. A term paper will be required. Instructors: Middlebrook, Mead.

*EE 190 c
Transistor bias methods and use in D.C. low-frequency and high-frequency amplifiers; power amplifiers; oscillators, switching circuits; regulators. Associated analysis, synthesis, and problems. Text: An Introduction to Junction Transistor Theory, Middlebrook. Instructor: Mead.

EE 190 c
(3-0-6) Spring
Transistor bias methods and use in D.C. low-frequency and high-frequency amplifiers; power amplifiers; oscillators, switching circuits; regulators. Associated analysis, synthesis, and problems. Text: An Introduction to Junction Transistor Theory, Middlebrook. Instructor: Mead.

EE 106 ab - Electronic Circuits
(3-0-6) - Fall, Winter
Resistive diode circuits; rectifiers. Piecewise linear and incremental analysis of vacuum tubes and transistors. Power amplifiers: Class A and B. Electromechanical analogs: loudspeakers. Regulators. Waveshaping; multivibrators. Negative resistance and sinusoidal oscillators. Modulation and demodulation; AM and FM. Prerequisite: EE 1 ab. Instructor: Mead.

EE 106 ab - Electronic Circuits
(3-0-6) Fall, Winter
Prerequisite: EE 1 abc. Resistive diode circuits; rectifiers. Piecewise linear and incremental analysis of vacuum tubes and transistors. Power amplifiers: Class A and B. Electromechanical analogs: loudspeakers. Regulators. Waveshaping; multivibrators. Negative resistance and sinusoidal oscillators. Modulation and demodulation; AM and FM. Instructor: Mead.

EE 106 ab - Electronic Circuits
(3-0-6) Fall, Winter
Prerequisite: EE 1 abc. A course covering the general areas of nonlinear electronics. Diode circuits, rectifiers, clippers, clamps, mixers. Transistor and vacuum tube amplifiers treated from the equivalent circuit point of view; biasing, gain, frequency response, class A, B, and C power output and limitations. Transistor switching, saturation, power converters, transistor choppers, direct coupled transistor logic. Oscillators; relaxation and harmonic, using 3 terminal and negative resistance devices. Modulation (AM and FM) methods. Texts: Transistor Circuit Analysis, Joyce and Clarke; Electronic and Radio Engineering, Terman. Instructor: Mead.

*EE 7 abc - Experimental Techniques in Electrical Engineering
(0-3-2) Fall, Winter, Spring
A general laboratory program designed primarily to prepare the student to participate in current experimental research in the fields of electrical engineering and physical electronics. Emphasis is placed not only upon careful laboratory procedure, but also upon selection of significant projects and interpretation of data. Formal laboratory experiments are available for students whose experimental background is insufficient to permit them to carry on original work. Text: Literature references. Instructor: Mead.

EE 106 ab - Electronic Circuits
(3-0-6) Fall, Winter
Prerequisite: EE 1 abc. A course covering the general areas of nonlinear electronics. Diode circuits, rectifiers, clippers, clamps, mixers. Transistor and vacuum tube amplifiers treated from the equivalent circuit point of view; biasing, gain, frequency response, class A, B, and C power output and limitations. Transistor switching, saturation, power converters, transistor choppers, direct coupled transistor logic. Oscillators; relaxation and harmonic, using 3 terminal and negative resistance devices. Modulation (AM and FM) methods. Texts: Transistor Circuit Analysis, Joyce and Clarke; Electronic and Radio Engineering, Terman. Instructor: Mead.

*EE 195 abc - Electronic Processes in Solids
(3-0-6) Fall, Winter, Spring
Prerequisite: EE 162 or equivalent. A treatment of topics in the field of applied solid-state physics relating to the current research activities of the staff. Topics to be covered in detail include superconductivity, ferromagnetism, semiconductors and hot electron transport in insulators and metals. Instructors: Mason, Nicolet, Mead, Wilts.

*EE 20 abc - Physics of Electronic Devices
(3-0-6) Fall, Winter, Spring
Prerequisite: Ph 2 abc. The application of modern physical principles to materials and devices important in present technological applications. Topics include: energy bands in solids, electrical properties of semiconductors, metals and dielectrics, semiconductor devices, plasmas, gas tubes, excitation and relaxation of electronic systems with reference to luminescence and stimulated emission. Text: Solid State Physical Electronics, Van Der Ziel. Instructor: Mead.

EE 135 abc (Formerly EE 195 abc) - Electronic Processes in Solids
(3-0-6) Fall, Winter, Spring
Prerequisite: EE 20 or equivalent. A treatment of topics in the field of applied solid-state physics relating to the current research activities of the staff. Topics to be covered in detail include superconductivity, ferromagnetism, semiconductors and hot electron transport in insulators and metals. Instructors: Nicolet, Mead, Wilts.

*EE 20 abc - Physics of Electronic Devices
(3-0-6) Fall, Winter, Spring
Prerequisite: Ph 2 abc. The application of modern physical principles to materials and devices important in present technological applications. Topics include: energy bands in solids, electrical properties of semiconductors, metals and dielectrics, semiconductor devices, plasmas, gas tubes, excitation and relaxation of electronic systems and reference to luminescence and stimulated emission. Text: Solid State Physical Electronics, Van Der Ziel. Instructor: Mead.

EE 135 abc - Electronic Processes in Solids
(3-0-6) Fall, Winter, Spring
Prerequisite: EE 20 or equivalent. A treatment of topics in the field of applied solid-state physics relating to the current research activities of the staff. Topics to be covered in detail include superconductivity, ferromagnetism, semiconductors and hot electron transport in insulators and metals. Instructors: Nicolet, Mead, Wilts.

EE 20 abc - Physics of Electronic Devices
(3-0-6) Fall, Winter, Spring
Prerequisite: Ph 2 abc. The application of modern physical principles to materials and devices important in present technological applications. Topics include: energy bands in solids, electrical properties of semiconductors, metals and dielectrics, semiconductor devices, plasmas, gas tubes, excitation and relaxation of electronic systems and reference to luminescence and stimulated emission. Text: Solid State Physical Electronics, Van Der Ziel. Instructor: Mead.

*EE 3 - Introduction to Solid State Electronics
(2-0-2) Fall
An introduction to the significant concepts of modern electronic devices such as diodes, junction and field effect transistors, controlled rectifiers, etc. Topics will include: conductors, energy barriers, junctions, and rectification. The operating principles of transistors and transistor-like devices. Instructor: Mead.

*EE 9 - Solid State Electronics Laboratory
(1-3-2) Winter
Prerequisite: EE 3. An introductory laboratory designed to illustrate the principles of modern electronic devices and modern electronic instrumentation. Experiments are designed to cover the range of sophistication from the fairly simple devices such as resistors or diodes to more complicated concepts such as the Hall Effect and drift-mobility. The student is afforded the opportunity of using a wide variety of modern electronic instruments including the campus-wide Citran computer system. Instructors: Mead, Humphrey.

*EE 4 - Introduction to Digital Electronics
(2-0-4) Winter
An introduction to the significant concepts and techniques of modern digital integrated electronic circuitry. The formulation of logical equations and their realization in hardware. Binary arithmetic and its implementation with logical functions. The course concludes with the design and construction of a simple digital computer. Instructor: Mead.

*EE 5 - Introduction to Linear Electronics
(2-0-4) Spring
An introduction to the significant concepts of modern linear electronic circuitry. AC circuit analysis; networks and their characterization in frequency and time domain. Amplifier, gain, frequency response. The use of operational amplifier to synthesize function of input variables. Power, dynamic range and the design of power output amplifiers. Instructor: Mead.

*EE 131 abc - Physics of Semiconductors and Semiconductor Devices
(3-0-6) Fall, Winter, Spring
Introduction to the concepts of semiconductor devices. Includes topics such as the solid state, electric properties of solids, Boltzmann and Fermi statistics, properties of regular arrays, band theory of crystals, electrons, holes, semiconductors, theory of p-n junctions and of semiconductor devices. Instructors: Mayer, McCaldin, and Mead.

EE 4 - Introduction to Digital Electronics
(2-0-4) Winter
An introduction to the significant concepts and techniques of modern digital integrated electronic circuitry. The formulation of logical equations and their realization in hardware. Binary arithmetic and its implementation with logical functions. The course concludes with the design and construction of a simple digital computer. Instructor: Mead.

EE 5 - Introduction to Linear Electronics
(2-0-4) Spring
An introduction to the significant concepts of modern linear e!ectronic circuitry. AC circuit analysis; networks and their characterization in frequency and time domain. Amplifier, gain, frequency response. The use of operational amplifier to synthesize function of input variables. Power, dynamic range and the design of power output amplifiers. Instructor: Mead.

*EE 10 - Digital Electronics Laboratory
(0-3-3) Spring
Prerequisite: EE 4. 6 units credit allowed toward freshman laboratory requirement. An introductory nonstructured project laboratory designed to provide an opportunity for projects related to the course EE 4. The student is expected to design, build, and test his own digital system. Admission by approval of project proposal. Instructor: Mead.

*EE 281 - Semiconductor Devices
(3-0-6) Fall
Prerequisite: APh 181 ab, its equivalent. or instructor's permission. An advanced graduate course in the physics, design, production, and use of semiconductor devices. Emphasis is placed on the engineering approach. The devices discussed will range from the simple diode to complex multijunction devices employed in integrated circuits. Instructor: Mead.

EE 4 - Introduction to Digital Electronics
(2-0-4) Winter
An introduction to the significant concepts and techniques of modern digital integrated electronic circuitry. The formulation of logical equations and their realization in hardware. Binary arithmetic and its implementation with logical functions. The course concludes with the design and construction of a simple digital computer. Instructor: Mead.

EE 5 - Introduction to Linear Electronics
(2-0-4) Spring
An introduction to the significant concepts of modern linear electronic circuitry. AC circuit analysis; networks and their characterization in frequency and time domain. Amplifier, gain, frequency response. The use of operational amplifier to synthesize function of input variables. Power, dynamic range and the design of power output amplifiers. Instructor: Mead.

EE 10 - Digital Electronics Laboratory
(0-3-3) Spring
Prerequisite: EE 4. 6 units credit allowed toward freshman laboratory requirement. An introductory non-structured project laboratory designed to provide an opportunity for projects related to the course EE 4. The student is expected to design, build, and test his own digital system. Admission by approval of project proposal. Instructor: Mead.

EE 281 - Semiconductor Devices
(3-0-6) Fall, Winter, Spring
Prerequisite APh 181 ab, its equivalent, or instructor's permission. An advanced graduate course in the physics, design, production, and use of large-scale integrated circuits. Emphasis is placed on the engineering approach. Instructor: Mead.

EE 4 - Introduction to Digital Electronics
(2-0-4) Winter
An introduction to the significant concepts and techniques of modern digital integrated electronic circuitry. The formulation of logical equations and their realization in hardware. Binary arithmetic and its implementation with logical functions. The course concludes with the design and construction of a simple digital computer. Graded pass/fail. Instructor: Mead.

EE 10 - Digital Electronics Laboratory
(0-3-3) Spring
Prerequisite: EE 4 and approval of project proposal. 6 units credit allowed toward freshman laboratory requirement. An introductory non-structured project laboratory designed to provide an opportunity for projects related to the course EE 4. The student is expected to design, build, and test his own digital system. Graded pass/fail. Instructor: Mead.

EE 112 abc - Network Synthesis
(2-0-7) Fall, Winter, Spring
Prerequisite: AM 95 abc. Passive network analysis and synthesis, feedback amplifiers, closed loop transfer functions, active filters. Sample data systems, digital/linear delay functions, digital filters, and digital signal processing. Second and third terms seminar format, requires extensive student participation. Instructors: Martel, Mead, Wilts.

EE 281 abc - Semiconductor Devices
(3-0-6) Fall, Winter, Spring
Prerequisite: APh 181 ab, its equivalent, or instructor's permission. An advanced graduate course is the physics, design, production, and use of large-scale integrated circuits. Emphasis is placed on the engineering approach. Instructor: Mead.

EE 4 - Introduction to Digital Electronics
(2-0-4) Winter
An introduction to the significant concepts and techniques of modern digital integrated electronic circuitry. The formulation of logical equations and their realization in hardware. Binary arithmetic and its implementation with logical functions. The course concludes with the design and construction of a simple digital computer. Graded pass/fail. Instructor: Mead.

EE 10 - Digital Electronics Laboratory
(0-3-3) Spring
Prerequisite: EE 4 and approval of project proposal. 6 units credit allowed toward freshman laboratory requirement. An introductory non-structured project laboratory designed to provide an opportunity for projects related to the course EE 4. The student is expected to design, build, and test his own digital system. Graded pass/fail. Instructor: Mead.

EE 112 abc - Network Synthesis
(2-0-7) Fall, Winter, Spring
Prerequisite: AM 95 abc. Passive network analysis and synthesis, feedback amplifiers, closed loop transfer functions, active filters. Sample data systems, digital/linear delay functions, digital filters, and digital signal processing. Second and third terms seminar format, requires extensive student participation. Instructors: Martel, Mead, Wilts.

EE 281 abc - Semiconductor Devices
(3-0-6) Fall, Winter, Spring
Prerequisite: APh 181 ab, its equivalent, or instructor's permission. An advanced graduate course in the physics, design, production, and use of large-scale integrated circuits. Emphasis is placed on the engineering approach. Instructor: Mead.

EE 4 - Introduction to Digital Electronics
(2-0-4) Winter
An introduction to the significant concepts and techniques of modern digital integrated electronic circuitry. The formulation of logical equations and their realization in hardware. Binary arithmetic and its implementation with logical functions. The course concludes with the design and construction of a simple digital computer. Graded pass/fail. Instructor: Mead.

EE 10 - Digital Electronics Laboratory
(0-3-3) Spring
Prerequisites: EE 4 and approval of project proposal. 6 units credit allowed toward freshman laboratory requirement. An introductory non-structured project laboratory designed to provide an opportunity for projects related to the course EE 4. The student is expected to design, build, and test his own digital system. Graded pass/fail. Instructor: Mead.

EE 281 abc - Integrated Circuit Design
(3-0-6) Fall, Winter, Spring
Prerequisite: Proficiency in semiconductor device physics, circuit design, and logic design. An advanced graduate course in the physics, design, production, and use of large-scale integrated circuits. Emphasis is placed on the realization of system functions in large-scale integrated circuits. Instructor: Mead.

CS/EE 11 - Digital Electronics Laboratory
(0-3-3) Spring
Prerequisites. CS/EE 4 and approval of project proposal. 6 units credit allowed toward freshman laboratory requirement. An introductory non-structured project laboratory designed to provide an opportunity for projects related to the course CS/EE 4. The student is expected to design, build, and test his own digital system. Graded pass/fail. Instructor: Mead.

CS/EE 281 abc - Integrated Circuit Design
(3-0-6) Fall, Winter, Spring
Prerequisite: Proficiency in semiconductor device physics, circuit design, and logic design. An advanced graduate course in the physics, design, production, and use of large-scale integrated circuits. Emphasis on system realization in VLSI. Instructor: Mead.

*CS 10 ab - Introduction to Computing
(2-0-4) Fall, Winter
State machines, stored program machines, control structures, modular program design, symbolic control and data manipulation, assemblers, compilers and high-level programming language. Instructor: Mead.

CS/EE 281 abc - Integrated Circuit Design
(3-0-6) Fall, Winter, Spring
Prerequisite: Proficiency in semiconductor device physics, circuit design, and logic design. An advanced graduate course in the physics, design, production, and use of large-scale integrated circuits. Emphasis on system realization in VLSI. Instructor: Mead.

CS 10 - Introduction to Computing
(2-0-4) Spring
State machines, stored program machines, control structures, modular program design, symbolic control and data manipulation, assemblers, compilers and high-level programming language. Instructor: Mead.

CS/EE 281 abc - Integrated Circuit Design
(3-6-3) Fall, Winter, Spring
Prerequisite: proficiency in semiconductor device physics, circuit design, and logic design. An advanced graduate course in the physics, design, production, and use of large-scale integrated circuits. Emphasis on system realization in VLSI. Instructor: Mead.

CS/EE 181 abc - Integrated Circuit Design
(3-3-6) Fall, Winter, Spring
Prerequisite: proficiency in semiconductor device physics. circuit design, and logic design. An advanced course in the design, production, and use of large-scale integrated circuits. Emphasis on system realization in VLSI. Instructors: Mead, Seitz.

*Bi/CS/Ph 250 abc - The Physics of Computation
(3-0-6) Fall, Winter, Spring
Prerequisite: Knowledge of at least one of the relevant fields and willingness to learn the others. Computation is a physical process or "behavior" carried out through the operation of the laws of physics on a very complex system. Common physical principles of computation emerge in the microphysics of computational devices-whether gate, Josephsen junction, neuron, or enzyme. When large numbers of simple devices are made into a computer or nervous system capable of large-scale parallel processing, new physical problems arise such as the meaning of time order or simultaneity; new logistical/physical problems dominate the design, evolution, building or growth of the system; and new collective phenomena emerge. Rather than ions or electrons, we find errors, coding, stability, data structures, and languages. The course will describe the physics of computation in a broad context ranging from biology to device physics, and from elementary logic devices to concepts in complexity. In addition, the course format will require each student to report in class on a result from the literature, and participate in discussions. Instructors: Mead, Hopfield, Feynman.

*CS/EE 186 abc - VLSI Design Laboratory
(0-6-3) Fall, Winter, Spring
Prerequisite: CS/EE 181 (may be taken concurrently). A laboratory emphasizing the design of Very Large Scale Integrated digital systems. Each student is required, by the end of the first term, to produce a complete design of a project of his or her own devising. Chips embodying these projects are fabricated and made available for test during the second term. A few large-scale designs are undertaken during the last two terms by members of several design teams. Participants are required to use well-defined design principles, disciplines, and synthesis techniques as part of the project execution. Instructor: Mead.

Bi/CS/Ph 250 abc - The Physics of Computation
(3-0-6) Fall, Winter, Spring
Prerequisite: Knowledge of at least one of the relevant fields and willingness to learn the others. Computation is a physical process or "behavior" carried out through the operation of the laws of physics on a very complex system. Common physical principles of computation emerge in the microphysics of computational devices-whether gate, Josephsen junction, neuron, or enzyme.

When large numbers of simple devices are made into a computer or nervous system capable of large-scale parallel processing, new physical problems arise such as the meaning of time order or simultaneity; new logistical/physical problems dominate the design, evolution, building or growth of the system; and new collective phenomena emerge. Rather than ions or electrons, we fmd errors, coding, stability, data structures, and languages. The course will describe the physics of computation in a broad context ranging from biology to device physics, and from elementary logic devices to concepts in complexity. In addition, the course format will require each student to report in class on a result from the literature, and participate in discussions. Graded pass/fail. Instructors: Mead, Hopfield, Feynman.

Bi/CS/Ph 250 abc - The Physics of Computation
(3-0-6) Fall, Winter, Spring
Prerequisite: Knowledge of at least one of the relevant fields and willingness to learn the others. The course will describe the physics of computation in a broad context ranging from biology to device physics, and from elementary logic devices to concepts in complexity. A more detailed course description will be found under the Biology option. Graded pass/fail. Instructors: Mead, Hopfield, Feynman.

CS 10 - Introduction to Computing
(2-3-4) Fall, Winter, Spring
State machines, stored program machines, control structures, modular program design, symbolic control and data manipulation, and high-level programming. Laboratory involves programming on personal computers in PASCAL. Students will be expected to become familiar with PASCAL and structured programming methodology. Three units credit allowed toward freshman laboratory requirement. Instructor: Mead.

Bi/CS/Ph 250 abc - The Physics of Computation
(2-4-3) Fall, Winter, Spring
Completion of undergraduate requirements for Computer Science, Physics, or Applied Physics, or equivalent quantitative background. Computation is a physical process or behavior carried out through the operation of the laws of physics on a very complex system. Common physical principles of computation emerge in the microphysics of computational devices whether transistor circuit or neuron. New physical problems arise with large-scale parallel systems such as the meaning of time order or simultaneity; new logistical/physical problems dominate the design, evolution, building, or growth of the system; and new collective phenomena emerge. Questions of errors, coding, stability, data structures, and languages cannot be separated from the device physics in large-scale and highly parallel systems. The course will describe the computation in a context ranging from device physics to biology, and from elementary logic devices to concepts in complexity. It will build toward the modeling, design and fabrication of circuits relevant to extensive parallel and collective computation. The course format will require each student to undertake a design project and participate in discussions. Instructors: Mead, Hopfield.

CS 10 - Introduction to Computing
(2-3-4) Spring
State machines, stored program machines, control structures, modular program design, symbolic control and data manipulation, and high-level programming. Laboratory involves programming on personal computers in PASCAL. Students will be expected to become familiar with PASCAL and structured programming methodology. Three units credit allowed toward freshman laboratory requirement. Instructor: Mead.

CS 10 - Introduction to Computing
(2-3-4) Spring
State machines, stored program machines, control structures, modular program design, symbolic control and data manipulation, and high-level programming. Laboratory involves programming on personal computers in PASCAL. Students will be expected to become familiar with PASCAL and structured programming methodology. Instructor: Mead.

*Bi/CS/Ph 185 - Collective Computation
(2-4-3) Fall
Prerequisite: Completion of undergraduate requirements for CS, physics or applied physics, or equivalent quantitative background. New physical problems arise with large-scale parallel systems such as the meaning of time order or simultaneity; new logistical/physical problems dominate the design, and new collective phenomena emerge. The course will describe the computation in a context ranging from device physics to biology, and from elementary logic devices to concepts in complexity. It will build toward the modeling, design and fabrication of circuits relevant to extensive parallel and collective computation. The course format will require each student to undertake a design or other project and participate in discussions. Instructors: Mead, Hopfield.

CS/Ph 186 ab - Experimental Projects in Collective Computation
(0-9-0) Winter, Spring
Prerequisite: Bi/CS/Ph 185. Projects course dealing with various aspects of collective computation as covered in Bi/CS/Ph 185. A completed project and report are required. Instructors: Mead, Hopfield.

CS 10 - Introduction to Computing
(2-3-4) Spring
Stored program machines, control structures, modular program design, symbolic control and data manipulation, data structures recursion, and high-level programming. Laboratory involves programming on personal computers in PASCAL. Students will be expected to become familiar with PASCAL and structured programming methodology. Instructor: Mead.

Bi/CS/Ph 185 - Collective Computation
(2-4-3) Fall
Prerequisite: Completion of undergraduate requirements for CS, physics or applied physics, or equivalent quantitative background. New physical problems arise with large-scale parallel systems such as the meaning of time order or simultaneity; new logistical/physical problems dominate the design, and new collective phenomena emerge. The course describes the computation in a context ranging from device physics to biology, and from elementary logic devices to concepts in complexity. It will build toward the modeling, design, and fabrication of circuits relevant to extensive parallel and collective computation. Each student must undertake a design or other project and participate in discussions. Instructors: Mead, Hopfield.

CS/Ph 186 ab - Experimental Projects in Collective Computation
(3-0-6) Winter, Spring
Prerequisite: Bi/CS/Ph 185. Projects course dealing with various aspects of collective computation as covered in Bi/CS/Ph 185. A completed project and report are required. Instructors: Mead, Hopfield.

Bi/CS/Ph 185 - Collective Computation
(2-4-3) Winter
Prerequisite: Completion of undergraduate requirements for CS, physics or applied physics. or equivalent quantitative background. New physical problems arise with large-scale parallel systems such as the meaning of time order or simultaneity; new logistical/physical problems dominate the design, and new collective phenomena emerge. The course describes the computation in a context ranging from device physics to biology, and from elementary logic devices to concepts in complexity. It will build toward the modeling, design, and fabrication of circuits relevant to extensive parallel and collective computation. Each student must undertake a design or other project and participate in discussions. Instructors: Mead, Hopfield.

CS/Ph 186 ab - Experimental Projects in Collective Computation
(3-3-3) Fall, Winter
Prerequisite: Bi/CS/Ph 185. Projects course dealing with various aspects of collective computation as covered in Bi/CS/Ph 185. A completed project and report are required. Instructors: Mead, Hopfield.

EE/CS 182 abc - Analog Integrated Circuit Design
(3-3-3) Fall, Winter, Spring
Prerequisites: EE 14, EE 90, APh 3, CS 10 or their equivalents. Device, circuit and system techniques for the design of large-scale CMOS analog systems. The MOS transistor above and below threshold. Current mirrors. The differential transconductance amplifier. Analog addition, subtraction, multiplication, absolute value, interpolation, division. Circuits with time constants: Linear filters of first and second order, monostable and astable relaxation oscillators. Automatic gain control. System examples from feedback control, vision, and auditory processing. In addition to doing laboratory work on elementary circuits, each student is required to design a modest system-level project and submit it for fabrication. Third term laboratory is reserved for testing and evaluating these projects. Instructor: Mead.

*CNS/CS/EE 182 abc - Analog Integrated Circuit Design
(3-3-3) Fall, Winter, Spring
Prerequisites: EE 14, EE 90, APh 3, CS 10 or their equivalents. Device, circuit, and system techniques for designing large-scale CMOS analog systems. MOS transistor above and below threshold; current mirrors; differential transconductance amplifier; analog addition, subtraction, multiplication, absolute value, interpolation division. Circuits with time constants: linear filters of first and second order, monostable and astable relaxation oscillators. Automatic gain and control system examples from feedback control, vision, and auditory processing. In addition to laboratory work on elementary circuits, each student will design a modest system level project and submit it for fabrication. Third-term laboratory is reserved for testing and evaluating these projects. Instructor: Mead.

CNS/CS/EE 182 abc - Analog Integrated Circuit Design
(3-3-3) Fall, Winter, Spring
Prerequisites: EE 14, EE 90, APh 3, CS 10 or their equivalents. Device, circuit, and system techniques for designing large-scale CMOS analog systems. MOS transistor above and below threshold; current mirrors; differential transconductance amplifier; analog addition, subtraction, multiplication, absolute value, interpolation division. Circuits with time constants: linear filters of first and second order, monostable and astable relaxation oscillators. Automatic gain and control system examples from feedback control, vision, and auditory processing. In addition to laboratory work on elementary circuits, each student will design a modest system level project and submit it for fabrication. Third-term laboratory is reserved for testing and evaluating these projects. Instructor: Mead.

*CNS/CS/EE 184 abc - Analog Integrated Circuit Projects Laboratory
Units by arrangement. Fall, Winter, Spring
Prerequisite: CNS 182 abc; may be taken concurrently with CNS 182 bc. Design projects in large-scale analog integrated systems. Each student, or pair of students, is expected to define, design, verify, and submit for fabrication a system of their choice. The project definition and simulation must be finished by the end of the second quarter (l84a), and the final design must be verified and submitted for fabrication by the end of the third quarter (184b). Testing and characterization of the fabricated circuits will be done in the first quarter of the following year (184c). A two-term version of the course can be made available by arrangement with the instructor. Graded on a pass/fail basis. Instructor: Mead.

CNS/CS/EE 182 abc - Analog Integrated Circuit Design
(3-3-3) Fall, Winter, Spring
Prerequisites: EE 14, EE 90, APh 3, CS 10, or their equivalents. Device, circuit, and system techniques for designing large-scale CMOS analog systems. MOS transistor above and below threshold; current mirrors; differential transconductance amplifier; analog addition, subtraction, multiplication, absolute value, interpolation division. Circuits with time constants: linear filters of first and second order, monostable and astable relaxation oscillators. Automatic gain and control system examples from feedback control, vision, and auditory processing. In addition to laboratory work on elementary circuits, each student will design a modest system level project and submit it for fabrication. Third-term laboratory is reserved for testing and evaluating these projects. Instructor: Mead.

*CNS/CS/EE 184 abc - Analog Integrated Circuit Projects Laboratory
Units by arrangement. Fall, Winter, Spring
Prerequisite: CNS 182 abc; may be taken concurrently with CNS 182 bc. Design projects in large-scale analog integrated systems. Each student, or pair of students, is expected to devise, design, verify, and submit for fabrication a system of their choice. The project definition and simulation must be finished by the end of the second quarter (184a), and the final design must be verified and submitted for fabrication by the end of the third quarter (184b). Testing and characterization of the fabricated circuits will be done in the first quarter of the following year (184c). A two-term version of the course can be made available by arrangement with the instructor. Graded on a pass/fail basis. Instructor: Mead.

CNS/CS/EE 182 abc - Analog Integrated Circuit Design
(3-3-3) Fall, Winter, Spring
Prerequisites: EE 14, EE 90, APh 3, CS 10, or their equivalents. Device, circuit, and system techniques for designing large-scale CMOS analog systems. MOS transistor above and below threshold; current mirrors; differential transconductance amplifier; analog addition, subtraction, multiplication, absolute value, interpolation division. Circuits with time constants: linear filters of first and second order, monostable and astable relaxation oscillators. Automatic gain and control system examples from feedback control, vision, and auditory processing. In addition to laboratory work on elementary circuits, each student will design a modest system-level project and submit it for fabrication. Third-term laboratory is reserved for testing and evaluating these projects. Instructor: Mead.

CNS/CS/EE 184 abc - Analog Integrated Circuit Projects Laboratory
Units by arrangement. Fall, Winter, Spring
Prerequisite: CNS 182 abc; may be taken concurrently with CNS 182 bc. Design projects in large-scale analog integrated systems. Each student, or pair of students, is expected to define, design, verify, and submit for fabrication a system of their choice. The project definition and simulation must be finished by the end of the second quarter (l84a), and the final design must be verified and submitted for fabrication by the end of the third quarter (184b). Testing and characterization of the fabricated circuits will be done in the first quarter of the following year (184c). A two-term version of the course can be made available by arrangement with the instructor. Graded on a pass/fail basis. Instructor: Mead.

CNS/CS/EE 182 abc - Analog Integrated Circuit Design
(3-3-3) Fall, Winter, Spring
Prerequisites: EE 14, EE 90, APh 3, CS 10, or their equivalents. Device, circuit, and system techniques for designing large-scale CMOS analog systems. MOS transistor above and below threshold; current mirrors; differential transconductance amplifier; analog addition, subtraction, multiplication, absolute value, interpolation division. Circuits with time constants: linear filters of first and second order, monostable and astable relaxation oscillators. Automatic gain and control system examples from feedback control, vision, and auditory processing. In addition to laboratory work on elementary circuits, each student will design a modest system-level project and submit it for fabrication. Third-term laboratory is reserved for testing and evaluating these projects. Instructor: Mead.

CNS/CS/EE 184 abc - Analog Integrated Circuit Projects Laboratory
Units by arrangement. Fall, Winter, Spring
Prerequisite: CNS 182 abc; may be taken concurrently with CNS 182 bc. Design projects in large-scale analog integrated systems. Each student, or pair of students, is expected to define, design, verify, and submit for fabrication a system of their choice. The project definition and simulation must be finished by the end of the second quarter (184a), and the final design must be verified and submitted for fabrication by the end of the third quarter (184b). Testing and characterization of the fabricated circuits will be done in the first quarter of the following year (184c). A two-term version of the course can be made available by arrangement with the instructor. Graded on a pass/fail basis. Instructor: Mead.

CNS/CS/EE 182 abc - Analog Integrated Circuit Design
3-3-3 - Fall, Winter, Spring
Prerequisites: EE 14, EE 90, APh 3, CS 10, or their equivalents. Device, circuit, and system techniques for designing large-scale CMOS analog systems. MOS transistor above and below threshold; current mirrors; differential transconductance amplifier; analog addition, subtraction, multiplication, absolute value, interpolation division. Circuits with time constants: linear filters of first and second order, monostable and astable relaxation oscillators. Automatic gain and control system examples from feedback control, vision, and auditory processing. In addition to laboratory work on elementary circuits, each student will design a modest system-level project and submit it for fabrication. Third-term laboratory is reserved for testing and evaluating these projects. Instructor: Mead.

CNS/CS/EE 184 abc - Analog Integrated Circuit Projects Laboratory
Units by arrangement. Fall, Winter, Spring
Prerequisite: CNS 182 abc; may be taken concurrently with CNS 182 bc. Design projects in large-scale analog integrated systems. Each student, or pair of students, is expected to define, design, verify, and submit for fabrication a system of their choice. The project definition and simulation must be finished by the end of the second quarter (184a), and the final design must be verified and submitted for fabrication by the end of the third quarter (184b). Testing and characterization of the fabricated circuits will be done in the first quarter of the following year (184c). A two-term version of the course can be made available by arrangement with the instructor. Graded on a pass/fail basis. Instructor: Mead.

CNS/CS/EE 182 abc - Analog Integrated Circuit Design
(3-3-3) Fall, Winter, Spring
Prerequisites: EE 14, EE 90, APh 3, CS 10, or their equivalents. Device, circuit, and system techniques for designing large-scale CMOS analog systems. MOS transistor above and below threshold; current mirrors; differential transconductance amplifier; analog addition, subtraction, multiplication, absolute value, interpolation division. Circuits with time constants: linear filters of first and second order, monostable and astable relaxation oscillators. Automatic gain and control system examples from feedback control, vision, and auditory processing. In-depth laboratory work on elementary circuits and subsystems is an integral part of the course. Instructor: Mead.

CNS/CS/EE 184 abc - Analog Integrated Circuit Projects Laboratory
Units by arrangement. Fall, Winter, Spring
Prerequisite: CNS 182 abc; may be taken concurrently with CNS 182 bc. Design projects in large-scale analog integrated systems. Each student, or pair of students, is expected to define, design, verify, and submit for fabrication a system of their choice. The project definition and simulation must be finished by the end of the second quarter (184a), and the final design must be verified and submitted for fabrication by the end of the third quarter (184b). Testing and characterization of the fabricated circuits will be done in the first quarter of the following year (184c). A two-term version of the course can be made available by arrangement with the instructor. Graded on a pass/fail basis. Instructor: Mead.

CNS/CS/EE 182 abc - Analog Integrated Circuit Design
(3-3-3) Fall, Winter, Spring
Prerequisites: EE 14, EE 90, APh 3, CS 10, or their equivalents. Device, circuit, and system techniques for designing large-scale CMOS analog systems. MOS transistor above and below threshold; current mirrors; differential transconductance amplifier; analog addition, subtraction, multiplication, absolute value, interpolation division. Circuits with time constants: linear filters of first and second order, monostable and astable relaxation oscillators. Automatic gain and control system examples from feedback control, vision, and auditory processing. In-depth laboratory work on elementary circuits and subsystems is an integral part of the course. Instructor: Mead.

CNS/CS/EE 184 abc - Analog Integrated Circuit Projects Laboratory
Units by arrangement. Fall, Winter, Spring
Prerequisite: CNS 182 abc; may be taken concurrently with CNS 182 bc. Design projects in large-scale analog integrated systems. Each student, or pair of students, is expected to define, design, verify, and submit for fabrication a system of their choice. The project definition and simulation must be finished by the end of the second quarter (184a), and the final design must be verified and submitted for fabrication by the end of the third quarter (184b). Testing and characterization of the fabricated circuits will be done in the first quarter of the following year (184c). A two-term version of the course can be made available by arrangement with the instructor. Graded on a pass/fail basis. Instructor: Mead.

CNS/CS/EE 182 abc - Analog Integrated Circuit Design
(3-3-3) Fall, Winter, Spring
Prerequisites: EE 14, EE 90, APh 3, CS 10, or their equivalents. Device physics, circuit, and system techniques for designing large-scale CMOS analog systems. Devices covered include the MOS transistor above and below threshold, the floating gate MOS transistor (including Fowler-Nordheim tunneling and hot electron injection), and silicon phototransducers (photodiodes and phototransistors). Static circuits studied include the current mirror, the differential pair, and the operational transconductance amplifier. Time-varying circuits studied include linear and nonlinear filters of first and second order, and monostable and astable relaxation oscillators. System examples from feedback control systems, vision, and audition. In-depth laboratory work on elementary circuits and subsystems is an integral part of the course. Instructor: Mead.

* = courses started by Carver Mead